Escon Automatic Rescue Device (ARD) is an
automatic rescue mechanism, for rescuing passengers trapped in an elevator
due to malfunctioning or power cut. Manual rescuing of passengers trapped in an elevator takes considerable time, causing anxiety to the passengers. IF
the rescue operations were not conducted by the trained personal, it might cause injuries to passengers. ARD will safely land the passengers to the nearest floor within minutes of power failure,
thereby avoiding Panic Situation. Hence, ARD is a valuable ADD ON device to
the elevator.
Salient Features :Unique “optimum direction selection” feature make the elevator safe.
• Fully automatic with instant operation,
need no human intervention.
• Well integrated into elevator system and ensures safety.
•
Safe Landing during power failure and elevator control system failure.
• Micro controller based technology with PWM device.
• Sealed (SMF) batteries
are used for lesser maintenance cost.
• Compact with batteries inside the system.(del)
• Fault detection LED's on board
ensure caution
3- DOT MATRIX AND LCD DISPLAY
21st Century in Electronic Display;
As a leader in elevator display technology, Escon equipment ranges from basic Segmented and Dot Matrix Position Indicators to full-color, LCD displays with intelligent micro-controllers that provide active interfacing between building and elevator.
a) Dot Matrix’s Intelligent Design
While remaining competitive in Segmented Displays, Escon also has a strong suit in Dot Matrix Displays. The intelligent design of Dot Matrix ensures much greater flexibility, scrolling messages, color choice and eliminates the need for encoders.
b) LCD Display
Our LCD displays provide an attractive and active interface between the building and the elevator. You have the color as well as direction option in the Display, that will show time, temperature, date , month, your title( e.g:- ESCON ELEVATORS PVT. LTD.) continually on your display.
4- FULL HEIGHT INFRARED SENSOR
I R full height curtain sensors are used for automatic doors either center
opening or telescopic for personal safety between doors.
TECHNICAL SPECIFICATION:-;
• Number of beam (Max) 154 numbers.
• Operating environment – 20Deg. C --- +65Deg C
• Vertical tolerance +/- 12.5 Deg.
• Horizontal Tolerance +/- 3mm , 5 Deg..
• Response time 5 ms
5. Door mechanism with closed loop door operator
A) LANDING OPERATION PANEL (LOP):-
• 7 Segment LED – 1 or 2 digit
• Dot Matrics LED - 1 or 2 Digit scrolling arrow.
• Interface options parallel/serial R S 485 Communication.
• Floor number calibrat on site.
• Support 1PB / 2PB ( UP / DN) mode.'
• High efficiency DC-DC Regulation which reduces power consumption
B) CAR OPERATING PANEL (COP)
• Supports upto G+60 Stops.
• Mini LCD / 320 x 120 dots Monochrome and colour LCD with image.
• 7 Segment LED – 1 or 2 digit
• Dot Matrix LED - 1 or 2 Digit scrolling arrow.
• Interface options parallel/serial R S 485 Communication.
• Floor number calibratable on site.
• Support 1PB / 2PB ( UP / DN) mode.'
• High efficiency DC-DC Regulation which reduces power consumption